The truck let it in the yard. We set it up in less than three hours (if you forget meal time with a well deserverd Orval beer).
Change in mood
Par défautI’m about to received my new desk, a Cadac j type. It will be used for tracking (preamp and eq) and summing (sub mixing bus). Mix will stay in the box. I’ll set up an Artist Control above the j type for pro tools and a new monitoring system, the Dangerous Mointor ST-SR will be the Martinsound multimax EXR finally. The CR will be 5.1, hybrid.
By the way, the control 24 is on sale on ebay belgium. SOLD.
Official Website
Par défautHere is the link of my Official Website. It’s provisional but it could be interesting for some cause it’s in French.
Home
Par défautHere we are, I haven’t show pics of my home but I’ve done it as well. It already took me more than two years as I’ve done a lot by myself. Final planes with last mods are about to come. I ‘ll post some shareable version for you. I’ve post a link or Gearslutz. It will be the place to ask about details, if anybody wish.
Behind the studio floor
Par défautThe lounge and part of my house is behind the studio. I build a second frame with plasterboard and insulation.
structure and deck
Par défautroof’s structure beam are 28cm high and more than 7m long. It looks like a reverse boat. Deck are now all in place. From outside, the roof is the same than before. Inside, the space is all free. Note while the roof was open, we load the concrete block for inside wall (concrete and concrete again…).
Moisture
Par défautAs it’s an old building, it’s subject to moisture. I have to drain the back of studio. So we dig as deep as the building go down. We also dig a yard at the same time for my home.
New roof
Par défautthe new roof need strongs supports to land on. So, concrete around with wall injections and a big « lamellé collé » (in french) on the top. This beam is more than 1,6 tons heavy, and one side is nearly 20m2… and it was a windy day. I fly for the first time.
My wife
Par défautShe’s on the last picture. I thank her here and time and time again to bear me and my building project.
Studio floating floor
Par défautThese big concrete pre (6,5m by 1,2m) stand on the merfomer. Lay down was really fast, around five hours. with the concrete on, the tickness is 40cm. It leave us free to build a concrete wall everywhere we want, as if it was on the ground.